DCA5.080.512 (80W)

Overview:
OPUS Solutions 80W Intelligent DC-DC power supply is designed specifically to be used in an automotive environment. This product brings a new dimension to your PC's mobility. When you switch off the Power-ON lead the PC can go into shut down, standby or hibernate modes automatically.

The 80W DC-DC Power supply has a micro-controller that controls and monitors various functions of the power supply operation. It monitors automobile battery voltage to protect against deep discharge. The Power-ON lead is monitored to start the PC when the power is turned on and to implement a safe shutdown procedure. It controls and monitors motherboard signals to provide smooth power-up and power down sequences. In addition, it also responds to shut down, stand-by and hibernate modes.

The power supply can be programmed to shut down the PC after a delay of time. Its outputs are monitored to assure proper PC operation. A green LED indicator in the power supply continually indicates the power system status and health. It is also used for troubleshooting. There are features that are built-in for trouble-free and safe PC operation. The input power is protected against transients, load dumps and double battery during jumpstarts. The PC does not reboot during engine start or cranking. It also uses state-of-the-art technologies and the most advanced techniques to maximize efficiency, performance and reliability. Simply put, there is no other PC power supply like it.

Features:
- 80 Watt output
- High Efficiency DC-DC Power Supply (extended battery life)
- Wide input voltage range (7V-32V)
- Built in auto shutdown
- Delayed shutdown timer
- On/Off power switch input
- Remote trigger output
- Load dump protected
- High efficiency (extended battery life)
- User configurable Start-up / Shut-down voltage
- Simple to install

Applications:
- Commell LV-671 Mini-ITX Pentium-M Motherboard
- VIA Epia TC Mini-ITX C3 main boards
- LCD monitors that require regulated 12V in automotive application, etc.
- Single Board Computers
- External Hard Drives

DCA5.080.512 (80W)

Specifications:

Input
Normal operating voltage:	7.5V to 30V DC
Peak input voltage range:	7V to 36V DC (less than 1sec at 50% duty cycle repetition)
Idle state power consumption:	<3mA (while system powered down or in hibernation mode)

Output			Line+Load
DCA.080.512	80W	Ripple	Regulation
+5V	8A max, 12A pk	50mv p-p max	1.5%
+12V	3.5A max, 4.5A pk	100mv p-p max	1.5%

General
Power supplies overall efficiency:	>91% for 12V system and 86% for 24V system
Shut Down Delay Time:	10sec. (Default), 10min, 30min or 60min (set by Jumper)
Start-up voltage:	9.5V, 10.5V, 11.5V or 12.0V +- 0.25V
Low battery shutdown voltage:	8.5V, 9.5V, 10.5V or 11V +- 0.25V
Low battery detection duration:	10 sec.
Wake on interrupt time:	20 minutes (while ignition is off)
Ignition or ON/OFF input current:	<5 mA
Remote trigger output source current	0.3A max (switched battery>
MTBF:	250,000 hrs min.
Cooling:	Forced air or thermal coupling to heat sink for loads above 60W
Operating temperature:	-20C to 65C
Input fuse:	10A mini blade (automotive mini blade fuse)
External Dimensions
DC-DC PCB Module dimensions:	170mm x 50mm x 16mm
	6.7" x 1.97" x 0.63"
Weight:	100 Grams, 0.24lb

Part number	Description
DCA5.080.512-H	DC-DC Power Supply Module with 12V and 5V Output
DCA5.080.512-V	DC-DC Power Supply Module with 12V and 5V Output and vertical connectors
DCA5.UT	U-Frame/Heat Sink for 80W DC-DC
DCA5.UC	Full Enclosure/Heat Sink for 80W DC-DC

DCA5.080.512 (80W)

DCA5.080.512 (80W)

Support & Download:
DCA5-080 xx Quick Guide

You must choose: Input Connector before continuing your order.

Enclosure:

DCA Enclosure/Heat Sink

x = $0.00

+$20.00

DCA U-Frame/Heat Sink

x = $0.00

+$10.00

Input Connector: REQUIRED

Horizontal

x = $0.00

+$0.00

Vertical

x = $0.00

+$0.00

Output Connector: REQUIRED

Horizontal

x = $0.00

+$0.00

Vertical

x = $0.00

+$0.00

Components total: $0.00